Pseudo-Sling loader version 1.2.1 (v6.0)
0 396 214

MOD Pseudo-Sling loader version 1.2.1 FOR SNOWRUNNER (v6.0)

Due to the basic limitations of the Snowrunner winch system, you can only attach to one point at a time. As a rule, this means that you cannot lift vehicles straight up, and their placement on other trucks or trailers varies from "slightly annoying" to "I will break the monitor if this time fails."

In real life, you have various tools and means for lifting vehicles using a crane or a helicopter, while loading slings is a relatively simple and versatile option. This mod is aimed at simulating the loading of slings, but since this is a simulation, there are certain obvious problems that you should consider when using this mod:

A crane hoist point hangs over most trucks - this was done specifically to improve balance during hoisting.
Load balancing on the fly is virtually impossible - I calibrated the points of the truck so that they are in the middle, but different attachments or their absence shift the center of gravity. Heavy trucks - It is recommended to use more powerful cranes if you want to lift medium and large trucks completely above the ground.

Installation:

1. Go to SnowRunner \ en_us \ preload \ paks;
2. Open initial.pak there through any archiver
3. We transfer the files from the archive to the appropriate folders and agree to a replacement.

Version 1.2.1 for SnowRunner (v6.0):

Added balanced winch point to DLC Ford F750, Tuz-16 cars

Credits: Alighierian

Photo


Download239 KB


TAGS:Loader, (v6.0), 1.2.1, PSEUDO-SLING, version

SIMILAR MODIFICATIONS

COMMENTS
avatar