attention: For the correct operation of this mod, carefully read everything in this description, otherwise the mod may not work correctly, spend a little of your time reading and so you can fully enjoy the mod.

Circular irrigation systems provide circular irrigation of large areas. They are used in places where water is a strong limiting factor. The efficiency of circular irrigation ranges from 85% to 90%. Liquid fertilizers and herbicides can also be added to irrigation.

In order for the hinges to work, I had to integrate them into a vehicle with an engine.
Thus, it can work without the need to attach to the car.
We can also leave them to work without having to be in the car.
To do this, we need to disable automatic startup in the car settings.
However, the cars turn off after 3 minutes if we are more than 300 meters away from it.
On the PC, this is solved with the help of the "Disable Turn Off Motor" mod, which prevents the engines from turning off, even if we are more than 300 meters away.

Now let's look at the functions and how it works.
The mod can be found in: Tools/Fumigators.

Specifications:
- Base price: $45,800.
- Working width: 68 meters, 124 meters, 180 meters and 236 meters.
- Field contour guides: (Yes or No)
- Coupling configuration: low coupling (ball) or normal coupling (pin)
- Number of sessions: 1 section (radius 68 m), 2 sections (radius 124 m), 3 sections (radius 180 m) or 4 sections (radius 236 m).
- Rotation and duration configuration: Full circle, 3/4 circle, 1/2 circle and 1/4 circle, duration 3, 5, 10, 20 and 30 minutes.
- Note: The short duration (3 and 5 minutes) causes the rod to rotate very quickly, and at the beginning and at the end it hits.
- Color configurations: hinge, trailer and wheels
- 64 colors available for all color configurations (metallic, matte and chrome).
- Tank capacity: 2000 liters of liquid fertilizer or herbicide.
- Consumption of liquid fertilizers or herbicides: 500 liters per full turn and duration of 30 minutes.

Operation.
- Warnings: The rotary mechanism can be unfolded and folded only in its original position. Never turn the hinge if it is not unfolded.
- Take the trailer to the field where we want to install it.
- Note. Although the hinge adapts well to sloping terrain, it works best and has the least vibration on flat terrain.
- If we select the guides in the store, we can make them visible with the left mouse button and see if they fit where we want to put them, these guides are also useful for drawing fields.
- It is necessary to level the place where we will put the pin and remove the soil layer, otherwise the base will vibrate.
- We place the trailer in the direction in which we want the rod to exit, the rod turns towards the rear of the trailer.
- Having placed it in the place we need, we unhook it from the vehicle with which we transport it, approach the trailer and sit on it as if it were an ordinary vehicle (Q key).
- Now we deploy the pivot with the Z key (open the lid), the more sessions the pivot has, the more difficult it is to deploy it until the red rotating lights go out, it is not fully deployed.
- Now we fill the tanks with liquid fertilizer or herbicide, this step can also be done before the deployment of a circular installation, even in our warehouse or farm.
- Note: diesel fuel should never be refueled, since its consumption is zero.
- After the tanks have been deployed and filled, turn on the sprayer with the B key and turn it with the X key.
- Now we can get out of the rod and let it work.
- The pin stops automatically when it reaches the end, but the sprayers do not turn off, they need to be turned off manually.