Mod Bridge Pack v1.0.0.1 for Farming Simulator 2019
This set contains seven different bridges to cross trenches, rivers, or roads! There are two main types of bridges; A standard axle allows vehicles and tractors of a certain width to pass, while a single-wheel axle can be of any width. The bridge is powered by a single wheel bridge, where two bridges must be side by side to complete the bridge. This will allow you to use any width for any size machine!
Changelog 1.0.0.1
- Added four new bridges
- New store images
- Updated mod description
Prices:
Small bridge: 550 €
Medium bridge: 925 €
Big bridge: 1225 €
Bridge XL: € 1560
One-wheel axle: 700 €
One-wheel bridge Big: 988 €
One-wheel axle XL: 1105 €
To get the full functionality of these bridges, there is
several important steps for it to work properly:
1) Make sure one side of the bridge is aligned before installing it!
2) After you have done this, open the store and select the bridge you want to use. If the bridge does not completely cover a crossing, you may need to balance some of the crossings until the bridge locks into place.
3) Then place this bridge on the leveled surface.
4) Finally, lift the ground along the sides of the bridge if necessary to get a smooth transition from the ground, and secure the terrain under the bridge if it falls through!