MOD LIEBHERR 909 Pack v1.0.1 for Farming Simulator 2019

LS19 LIEBHERR 909 Pack Liebherr wheeled excavator with numerous tools in 4 different versions: LIEBHERR (original yellow), GaLa-Bau (green), HoT-online-Edition and Mario Hirschfeld Logistics.
LS19 Liebherr package

Version: 1.0.1
Changelog:
- Fixed SpeedNeedle
- Tool attachment: buckets are now firmly held at the attachment point, pliers and woodworking machine have only slight "sliding behavior".
- Attacher for SwingTools: Unfortunately, the two grippers are still pulling when they move. Noticeable slight improvement, I could no longer get the GIANTS physics to work. Sorry!
- Added reverse driving function. Now everyone can choose for themselves where the back and front of the excavator are located ;-))

! ! ! IMPORTANT ! ! !
This mod does not work without the "SimpleIC" mod by Modelleicher.

! ! ! RECOMMENDED! ! !
For this mod pack I recommend the sound mod "FS19_WorkRPM" Download ZZZ FS19 WorkRPM zip

! ! ! NOTE! ! !
Since this mod uses eight movable axes, I have included an additional description with tips for axes distribution (axes placement.docx)

This mod pack consists of a Liebherr 909 wheeled excavator and many useful attachments for agricultural and forestry work. There are four branded specialty paints:
Gardening and Landscaping Liebherr HoT-OnlineTeam Mario Hirschfeld Logistic
All tools are as technically necessary and the excavator has dynamic hydraulic hoses.
IMPORTANT: This package cannot be modified, converted, or re-downloaded.
Tobe suggested

DESCRIPTION
Wheel excavator Liebherr 909:
Type designation 909 is fictitious, in principle it is
Liebherr A 900 C Litronic (built 2006-2012). However, this excavator mod is heavier and more durable, hence the new type designation.
It has four-wheel drive, animated PTO and steerable swing axle. Two fold-out legs stabilize the excavator during operation.
The cockpit is fully animated with on-board computer, joysticks, pedals, steering wheel, folding armrest, suspension seat and instrument symbols. With SimpleIC, you can open the door, slide the side window, open the roof window and turn on the cabin lighting. There are three camera positions and of course a complete lighting program. All attachments can be attached to the "Coupling" and connected with hydraulic hoses.

Blade / Sliding Shield:
The sliding plate can be used both as an additional support during the operation of the excavator, and for pushing out bulk materials. Thanks to the collision, you can also use it to push tree trunks, bales and the like. Has animated hydraulic cylinders and hoses.

Note on using / fillTypes:
I chose the possible "fill types" of the tools because they make sense to me and give each tool a right to exist and buy.
If you are playing on a card with multiple fruits, you must add the additional required "fillTypes" to the corresponding XML files yourself.
Nobody needs my permission if it is for personal use only.

Bucket / excavator shovel
Classic excavator tool with a lifting capacity of 3.0 tons. For cereals, seeds and fertilizers.

SieveBucket Screening Bucket / Screening Excavator:
Sieve shovel with a capacity of 2.5 tons. Used for root crops, manure, silage, shredded material and wood chips.

TrayGripper / Excavator Body Grab:
A freewheeling tool that attaches to the excavator hitch with an adapter (as it actually is). With animated cylinders and hoses. The grab has a capacity of 3.2 tons and can be used to pump grain, seeds, fertilizers and pig feed. However, due to the collision of grab excavators, bales, tree trunks, etc. can also be captured.

SieveGripper grapple / excavator:
Similar to an excavator grapple, but can be used for root crops, manure, silage, shredded material, wood chips, TMR, hay, grass and straw.

BranchGrapple / Excavator Grapple
Fixed swivel grab for all work with hard materials such as bales, sawed branches and tree trunks.

LogGrapple / log grapple:
Also permanently mounted and rotating, with animated cylinders and hoses. For loading tree trunks, etc.

WoodProcessor / Tree Trunk Processor:
This tool mod is based on a real harvester head from TST Forestry.
Unlike some other excavator modification tools, this is not a complete harvesting tool.
Trees to be cultivated must first be cut down and placed on the ground. Then the tree trunk is processed by a processor, i.e. it is delimbed and sawn into pieces.
When suspended, the processor is fixed to a pallet and can be transported

be handled by a heavy forklift.

Have fun with this expansive mod pack that took ¾ years to develop and contained countless bugs.