2TE10M Six-axle diesel train for Beamng Drive 0.34.2
- 7 configurations with different colors
- Moving wheels
- Properly placed exhaust
- Fully working headlights
- Drives well

To pair one locomotive with another, create a second one and change the rear American hitch B to the rear American hitch A and press L on the main engine and reverse until the green circle disappears

Press L to pair it with other xxyksc Trains 25G compatible wagons (Chinese wagons) and my Ammendorf Passenger Coach mod, Russian covered wagons and other freight wagons.
T - Accelerate and press W
G - Slow down and press S
L near the speedometer - Driving straight
H near the speedometer - Reverse gear
Alt + A - Change direction
H - Sound signal
K - Switch the front lights
[ - Switch the front taillights
I - Switch the taillights
] - Switch the rear taillights
Y - Interior lighting
If the train is not moving, make sure it is not stuck in the rails, press f11 and lift it up slightly, if the train is still not moving, release the air brakes (down arrow) and the independent brakes (P/space bar) and switch to m1.
Also, if you are traveling with two coupled locomotives and the first locomotive is moving slowly, make sure that the brakes on the rear locomotive are not engaged and change direction.

Known problems: poor interior quality, it is planned to replace it with a new one in the future